Precautions for the pre - press design of the cosmetic tube package
There are many noticeable details in the prepress design process of cosmetic tube packaging. Here we will pay attention to matters needing attention in small text and line design.
(1) small words and lines should be designed as a single package to avoid polychromatic inaccuracy. The width of a fine line can not be less than 0.1mm, otherwise it is easy to lose in printing or not clear. The net height of the Chinese font is not less than 1.8mm, and the net height of the English font is not less than 1.5mm.
(2) the white text should pay special attention in the design, if the text is small, especially fine strokes, to use monochrome. The font selection should pay attention to, round body, black, etc. the line is a better choice, and Arial, (old sung style thick horizontal thin vertical strokes etc.) is too large fonts to be used with caution, such as in the design of the font, will have to pay attention to the net height of Chinese font is not less than 2.5mm, net English font height not less than 2mm.
Cause:
(1) the ink stickiness of the after printing is too high compared with the first printed ink.
(2) the ink first printed is slow and the ink volume is large.
(3) the color strength of the four color inks is not properly balanced.
Treatment methods:
(1) printing with sticky ink and printing with sticky ink. The ideal viscosity requirement should be reduced in order of overprint color.
(2) the use of fast printing ink, and the concentration of high printing thin, the pattern is small first print, in order to facilitate the rear overprint.
(3) any set of wet and multicolor overprint ink is balanced in color strength. The same amount of ink can be applied when overprinting. If it is not printed together with the same set of ink, it should be dealt with properly.
There are many noticeable details in the prepress design process of cosmetic tube packaging. Here we will pay attention to matters needing attention in small text and line design.
(1) small words and lines should be designed as a single package to avoid polychromatic inaccuracy. The width of a fine line can not be less than 0.1mm, otherwise it is easy to lose in printing or not clear. The net height of the Chinese font is not less than 1.8mm, and the net height of the English font is not less than 1.5mm.
(2) the white text should pay special attention in the design, if the text is small, especially fine strokes, to use monochrome. The font selection should pay attention to, round body, black, etc. the line is a better choice, and Arial, (old sung style thick horizontal thin vertical strokes etc.) is too large fonts to be used with caution, such as in the design of the font, will have to pay attention to the net height of Chinese font is not less than 2.5mm, net English font height not less than 2mm.
Cause:
(1) the ink stickiness of the after printing is too high compared with the first printed ink.
(2) the ink first printed is slow and the ink volume is large.
(3) the color strength of the four color inks is not properly balanced.
Treatment methods:
(1) printing with sticky ink and printing with sticky ink. The ideal viscosity requirement should be reduced in order of overprint color.
(2) the use of fast printing ink, and the concentration of high printing thin, the pattern is small first print, in order to facilitate the rear overprint.
(3) any set of wet and multicolor overprint ink is balanced in color strength. The same amount of ink can be applied when overprinting. If it is not printed together with the same set of ink, it should be dealt with properly.
Comments
Post a Comment